RAYWAY™ Rubber Accelerator TMTD

Properties: White or light grey powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentrations. Meeting hot water becomes dimethyl ammonium and CS2. Be sensitive to skin and peogaster
Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with Willing ETU and also be used as a bactericide and pesticide
Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag
Storage: The product should be stored in a dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.

Category:
Item Powder Oiled powder Granule
Appearance White or light gray powder(granule)
Initial M.P. ℃≥ 140 140 140
Loss on drying % ≤ 0.30 0.50 0.40
Ash % ≤ 0.30 0.30 0.30
Residue on 150μm sieve % ≤ 0.10 0.10 \
Residue on  63μm  sieve % ≤ 0.50 0.50 \
Additive % \ 1.0-2.0 \
Granule Diameter, mm \ \ 1.0-3.0
Traits

White powder

Product Data

White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster

Application

Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with Willing ETU and also be used as bactericide and pesticide

Storage

The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years

Packaging

25kg plastic woven bag, paper with plastic film bag, kraft paper bag